Power Curbers pioneered the extruded curb concept in the early 1950s and has been building extruders for over 65 years. For jobs that require less expensive scab-on curb, the 150 extruder is ideal.
The mix is fed into the hopper either directly from the truck chute or by wheelbarrow, and is then forced under pressure through a specially designed mold. The result is a freestanding, structurally sound curb with a smooth finish.
Extruded curb is best placed on top of existing pavement or on a smooth, flat, 95% compacted sub-grade. The 150 extruder can be used for either concrete or asphalt curbs.
FEATURES:
POWERFUL ENGINE
Two Honda engine options provide plenty of power to handle hills and curves in parking lots or along streets.
EASY CONTROLS
The 150 features an electric start with the throttle control mounted on the steering handle for easy access from the front of the machine. The steering handle ensures smooth control and easy guidance of the machine from the left- or right-hand position.
SIMPLE DESIGN
The 9 pneumatic tires and 3 lifting jacks make steering and adjusting on the job easy to do. For pouring over an adhesive or for inserting rebar, simply shift the front wheels to the side.
MOLDS
The 150 can handle molds up to 12” (30 cm) wide and 12” (30 cm) tall. Choose from one of our stock profiles or contact our mold engineers to customize a mold to meet your requirements.
ENGINE Honda GX630R, 4-cycle air-cooled, electric start
Power: 20.8 hp (15.5 kW) @ 3600 rpm
Optional: Honda GX390, 4-cycle air-cooled, recoil start
Power: 11.7 hp (8.7 kW) @ 3600 rpm
DRIVETRAIN
Centrifugal clutch with V-belt drive and chain-driven auger
Single auger drive with compaction chamber
STEERING & ELEVATION
High-flotation design with 9 pneumatic tires and 3 lifting jacks
Option: Hard rubber wheels in lieu of pneumatic tires
AUGER
6” hollow-shaft steel auger with 5/8” interior dimension. Can be used for feeding longitudinal rebar through the mold (3/8” [10 mm] maximum rebar diameter).
Options: 5” hollow-shaft steel auger, for small profile molds; 6” cast auger (solid shaft). Spare augers available in all sizes.
MOLD
1 curb mold included
Option: Extra molds available
PAVING SPECIFICATIONS
Paving Speed (Maximum):
20.8 hp (15.5 kW): 25 feet/minute (7.6 m/min)
11.7 hp (8.7 kW): 15 feet/minute (4.6 m/min)
Curb Width: 12” (30 cm) maximum
Curb Height: 12” (30 cm) maximum
Clearance: Within 1” (2.5 cm) of obstructions
Radius (minimum): 24” (60 cm)
HOPPER CAPACITY
4 cubic feet (0.1 cubic meters)
DIMENSIONS
Length: 6’ 4.5” (1.94 m) with steering handle upright (8’ 5” [2.57 m] with steering handle in the brake position)
Width: 30” (76 cm)
Height: 32.5” (83 cm)
Weight: 20.8 hp 950 lb; 11.7 hp 800 lb
We use cookies to improve your experience. Privacy Policy.