The efficient Extendo 1046X is a 10,000-pound capacity machine that delivers up to 46 feet, 5 inches of lift height. It is offered with either a Cummins or Deutz Tier 4 Final diesel engine.
FEATURES
X-Command® Telematics
A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine:
• Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more.
• Identify minor mechanical issues before they become serious.
• Minimize downtime through remote diagnosis.
• Get reports and notifications via web browser or mobile app.
• Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls.
• Use current, accurate machine info to plan ahead on fleet maintenance.
Engine
The 74-horsepower Deutz Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance.
Drivetrain & Axles
Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed.
• Dana 212 Series high steer axles provide excellent tractive effort.
• Tight steer angle capability provides efficient turning radius.
• Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse.
• Full time 4-wheel-drive with limited-slip front axle differential.
Boom Construction
Formed boom plates offer greater boom strength with less weight.
• Boom deflection minimized for better control and accuracy placing loads.
• Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads.
• Fastener-less wear pads simplify service.
• Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components.
• Compression tilt design allows for a smaller bore cylinder with same tilt force.
• Heavy-duty extension chains help ensure stable boom functions and longevity.
Capacity & Reach
The 1046X has a capable 10,000-pound load capacity rating. It achieves forward reach up to 30 feet and a maximum lift height of 46 feet, 5 inches.
Hydraulics
The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds.
• Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills.
• Single lift cylinder provides operator with clear sight lines.
• Twin lines for tilt and auxiliary plumbing.
Steel Tanks
Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load.
Operator Station
The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown.
• New analog/LCD gauge cluster.
• Enhanced climate control system.
• Split door design allows upper half to lock in the open position.
• Flat, bolt-in glass can easily be removed or replaced.
• Openable rear window improves air flow while keeping cab dry.
• Lockable storage area under seat for manual, gloves and tools.
Electrical
• Split-system electrical panels allow for easier service of individual circuits.
• Heavy-duty bright LED lighting
• Weather-sealed connections
Service
• Easy access to all filters and fluid level indicators.
• Lockable fuel-fill in clean, accessible location.
• Inside of boom easily accessible for service.
• Non-tensioned boom hoses offer long service life.
DIMENSIONS -
Overall Height
8' 11" (272 cm) boom down
Fork Carriage
48" (122 cm) standard
Ground Clearance
18" (46 cm)
Overall Length
22' 11" (699 cm) to fork frame
Overall Width
8' 6" (259 cm)
Pallet Forks
2 x 4 x 48" standard
Approximate Operating Weight
26,750 lbs (12,134 kg)
ENGINE -
Model/Power
74 HP (55 kW) Deutz Tier 4 diesel with DOC muffler
Fuel Tank
30 gal. (114 L)
HYDRAULICS -
System
Pressure comp, axial piston pump
Features
Fully proportional functions
Auxiliary boom tip hydraulics
Quick disconnect for attachments
Controls
Single joystick, pilot operated
PERFORMANCE -
Max Load Capacity
10,000 lbs (4,536 kg)
Maximum Lift Height
46' 5" (1,415 cm)
Landing Height
42' (1,280 cm)
Maximum Forward Reach
30' (915 cm) at 24" LC
Below Grade Reach
3' 2" (97 cm)
Maximum Travel Speed
15.2 mph (24.5 km/h)
Turning Radius
14' 4" (437 cm)
Drawbar Pull (GVW)
26,150 lbs (11,861 kg)
Frame
20° of leveling (10° right and left)
Rear axle stabilization system
Transmission
Dana VDT12000 Series, 3-speed Powershift, forward & reverse
Axles
Dana 212 Series: 4-wheel drive, 45% limited slip front differential
Steering
4 wheel, 2 wheel, and crab steer
Brakes
Oil-immersed inboard disc service brakes, integral front SAHR park brake
Tires
13.00 x 24, 16 ply, G2 tread air-fill standard
Boom
3-section, slide pad
Automatic fork leveling without slave cylinder
We use cookies to improve your experience. Privacy Policy.