The 15,000-pound-capacity 1544X offers up to 44 feet of lift height for enhanced lifting capabilities in highway construction, pipe yard handling, and building sites. FEATURES X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine Powered by a 120-horsepower Deutz® TCD 3.6 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 223 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Formed boom plates offer greater boom strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Heavy-duty extension chains help ensure stable boom functions and longevity. Capacity & Reach The 1544X has a capable 15,000-pound load capacity rating. It achieves forward reach up to 29 feet and a maximum lift height of 44 feet. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting. • Weather-sealed connections. Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The Extendo 1536X delivers a maximum load capacity of 15,000 pounds, making it the ideal machine for heavy-duty material handling in pipe yards and highway construction jobs. FEATURES X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine Powered by a 120-horsepower Deutz® TCD 3.6 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 223 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Formed boom plates offer greater boom strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Heavy-duty extension chains help ensure stable boom functions and longevity. Capacity & Reach The 1536X has a capable 15,000-pound load capacity rating. It achieves forward reach up to 25 feet and a maximum lift height of 36 feet. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting. • Weather-sealed connections. Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The Extendo 1246X is a true material handling workhorse, delivering impressive load capacity, superior longevity, and controllability on a wide array of applications. FEATURES X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine Powered by a 120-horsepower Deutz® TCD 3.6 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 223 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Formed boom plates offer greater boom strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Heavy-duty extension chains help ensure stable boom functions and longevity. Capacity & Reach The 1246X has a capable 12,000-pound load capacity rating. It achieves forward reach up to 30 feet and a maximum lift height of 46 feet, 6 inches. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting. • Weather-sealed connections. Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The Extendo 1256X takes rugged Pettibone performance to another level. Offering 12,000 pounds of load capacity with its 4-section boom, the 1256X is the ultimate machine for tough jobs. FEATURES X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine Powered by a 120-horsepower Deutz® TCD 3.6 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 223 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction The 4-section boom features formed boom plates that offer greater strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Heavy-duty extension chains help ensure stable boom functions and longevity. Capacity & Reach The 1256X has a capable 12,000-pound load capacity rating. It achieves forward reach up to 40 feet and a maximum lift height of 56 feet, 6 inches. Outriggers Axle-mounted outriggers come standard on the 1256X. • Machine chassis will sway independent of the outrigger system. • Outriggers positioned to provide clear visibility out to the fork tips. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting. • Weather-sealed connections. Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The Extendo 1056X telehandler delivers 10,000 pounds max load capacity and up to 56 feet, 6 inches of lift height. It is available with either a Cummins or Deutz Tier 4 Final diesel engine. X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine Powered by a 120-horsepower Deutz® TCD 3.6 Tier 4 Final diesel engine with DEF and SCR aftertreatment. Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 212 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Newly designed boom with formed boom plates offers greater strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Single extension chain eliminates the need to balance dual chains. Capacity & Reach The 1056X has a capable 10,000-pound load capacity rating. It achieves forward reach up to 40 feet and a maximum lift height of 56 feet, 6 inches. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. - New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting • Weather-sealed connections Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

Providing an impressive maximum load capacity of 10,000 pounds without the need for outriggers, the Extendo 1044X telehandler offers exceptional jobsite efficiency. Maximum load capacity of 10,000 pounds Maximum lift height of 44 feet, 6 inches Maximum forward reach of 30 feet Maximum travel speed of 15.2 mph Single lift cylinder provides operators with clear sight lines for maximum visibility Boom’s compression tilt design allows for a smaller bore cylinder with the same tilt force Single extension chain eliminates the need to balance dual chains A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine The 74-horsepower Deutz Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 212 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Newly designed boom with formed boom plates offers greater strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Single extension chain eliminates the need to balance dual chains. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting. • Weather-sealed connections. Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The Pettibone Cary-Lift is the ultimate machine for moving and placing pipe, poles, logs, scrap and other materials. Purpose-built to handle heavy loads, the Cary-Lift can unload gondola cars or navigate tight stockyards with ease. The 204i is powered by a 200-HP Cummins QSB6.7 Tier 4 Final diesel engine with DOC and SCR aftertreatment.

The efficient Extendo 1046X is a 10,000-pound capacity machine that delivers up to 46 feet, 5 inches of lift height. It is offered with either a Cummins or Deutz Tier 4 Final diesel engine. FEATURES X-Command® Telematics A standard feature for 2 years on X-Series telehandlers, X-Command provides access to the real-time status of your Pettibone machine: • Remotely monitor equipment location and data: Engine hours, fuel usage, DEF level, battery voltage and much more. • Identify minor mechanical issues before they become serious. • Minimize downtime through remote diagnosis. • Get reports and notifications via web browser or mobile app. • Increase ROI by ensuring maintenance is up-to-date, and by eliminating certain field service calls. • Use current, accurate machine info to plan ahead on fleet maintenance. Engine The 74-horsepower Deutz Tier 4 Final diesel engine features a DOC muffler and requires no diesel exhaust fluid (DEF). Side pod mounting offers easy service access while allowing excellent curbside visibility and ground clearance. Drivetrain & Axles Drivetrain and axles have been optimized to provide greater tractive effort with minimal tradeoff on top end speed. • Dana 212 Series high steer axles provide excellent tractive effort. • Tight steer angle capability provides efficient turning radius. • Dana VDT12000 Powershift transmission offers 3 speeds, forward and reverse. • Full time 4-wheel-drive with limited-slip front axle differential. Boom Construction Formed boom plates offer greater boom strength with less weight. • Boom deflection minimized for better control and accuracy placing loads. • Boom overlap nearly doubled to provide smoother operation and reduce contact forces on wear pads. • Fastener-less wear pads simplify service. • Bottom-mounted external extend cylinder significantly reduces load on wear pads; cylinder location also provides better service access to internal boom components. • Compression tilt design allows for a smaller bore cylinder with same tilt force. • Heavy-duty extension chains help ensure stable boom functions and longevity. Capacity & Reach The 1046X has a capable 10,000-pound load capacity rating. It achieves forward reach up to 30 feet and a maximum lift height of 46 feet, 5 inches. Hydraulics The Extendo's hydraulic circuit delivers exceptional controllability, efficiency and cycle speeds. • Cylinder cushioning dampens the end of strokes – both extending and retracting – to prevent hard, jarring stops and avoid both wear-and-tear and potential load spills. • Single lift cylinder provides operator with clear sight lines. • Twin lines for tilt and auxiliary plumbing. Steel Tanks Damage-resistant, all-steel fuel and hydraulic tanks. Fuel tank provides ample fuel volume for a full day's work at 100% load. Operator Station The operator cab includes ergonomic seat, pedal, joystick and steering wheel positions. Available as an open canopy or enclosed cab, it features an all-steel interior with water-resistant components for easy washdown. • New analog/LCD gauge cluster. • Enhanced climate control system. • Split door design allows upper half to lock in the open position. • Flat, bolt-in glass can easily be removed or replaced. • Openable rear window improves air flow while keeping cab dry. • Lockable storage area under seat for manual, gloves and tools. Electrical • Split-system electrical panels allow for easier service of individual circuits. • Heavy-duty bright LED lighting • Weather-sealed connections Service • Easy access to all filters and fluid level indicators. • Lockable fuel-fill in clean, accessible location. • Inside of boom easily accessible for service. • Non-tensioned boom hoses offer long service life.

The new MTA Serie is designed to meet the needs of North American construction markets and rental sectors. The MTA 1055: high lift with full power performance. MTA 1055 has 10,000 lbs. (4,536 kg) capacity with max lift to 55' 7" (16.9 m) and reach to 42' 3" (12.9 m). Deutz 127 HP and 5 speed power shift trasmission. The new design also offers better visibility, comfort, performance, and a reduced total cost of ownership. New cabin design for more comfort and visibility Enhanced performance from combined hydraulic movements Better TCO with robust, high quality components

Introducing the Manitou MHT 11250, a powerful, new construction telehandler by MANITOU. Built for demanding tasks, it delivers exceptional performance on construction sites. Elevate your projects with this robust and reliable equipment.

The new MTA Serie is designed to meet the needs of North American construction markets and rental sectors. The MTA 1242: Strong performance with 12,000 lbs (5,443 kg) capacity and 127 HP Deutz engine with mid range boom lifting to 42' 6" (12.96 m) and reach to 28' 6" (8.68 m). The new design also offers better visibility, comfort, performance, and a reduced total cost of ownership. New cabin design for more comfort and visibility Enhanced performance from combined hydraulic movements Better TCO with robust, high quality components

New Manitou MLT 737 Agricultural Telehandler available. From renowned manufacturer MANITOU, this high-performing model is designed for demanding farming tasks. Ensure efficiency and reliability in your agricultural operations with this top-quality equipment.